1 copyright ? 2010, everlight americas inc. all rights reserved. release date : 16-feb-2017 issue no: dse-0017474 rev.1 www.everlightamericas.com smd ? b EAST16083GA3 features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapo r phase reflow solder process. ? mono-color type. ? pb-free. ? the product itself will remain wit hin rohs compliant version. B compliance with eu reach. B compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 15 00 ppm). description ? the smd led is much smaller than lead frame type components, th us enable smaller board size, higher packing density, reduced storage space and fi nally smaller equipment to be obtai ned. ? besides, lightweight makes them ideal for miniature application s. etc. applications ? backlighting in dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd , switch and symbol. ? general use.
datasheet smd ? b EAST16083GA3 2 copyright ? 2010, everlight americas inc. all rights reserved. release date : 16-feb-2017 issue no: dse-0017474 rev.1 www.everlightamericas.com device selection guide chip materials emitted color resin color ingan brilliant gr een water clear absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f 25 ma peak forward current (duty 1/10 @1khz) i fp 100 ma power dissipation pd 95 mw electrostatic discharge esd hbm 150 v operating temperature t opr -40 ~ +85 storage temperature tstg -40 ~ +90 soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec. electro-optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition luminous intensity iv 72 ----- 180 mcd i f =5ma viewing angle 2 1/2 ----- 120 ----- deg peak wavelength p ----- 518 ----- nm dominant wavelength d 520 ----- 535 nm spectrum radiation bandwidth ? ----- 20 ----- nm forward voltage v f 2.7 ---- 3.2 v reverse current i r ----- ----- 50 a v r =5v note: 1.tolerance of luminous intensity 11% 2.tolerance of dominant wavel ength 1nm 3.tolerance of forward volt age 0.05v
datasheet smd ? b EAST16083GA3 3 copyright ? 2010, everlight americas inc. all rights reserved. release date : 16-feb-2017 issue no: dse-0017474 rev.1 www.everlightamericas.com bin range of luminous intensity bin code min. max. unit condition q1 72.0 90.0 mcd i f =5ma q2 90.0 112 r1 112 140 r2 140 180 bin range of dom. wavelength group bin code min. max. unit condition y x 520 525 nm i f =5ma y 525 530 z 530 535 bin range of forward voltage group bin code min. max. unit condition q 29 2.7 2.8 v i f =5ma 30 2.8 2.9 31 2.9 3.0 32 3.0 3.1 33 3.1 3.2 note: 1.tolerance of luminous intensity 11% 2.tolerance of dominant wavel ength 1nm 3.tolerance of forward volt age 0.05v
datasheet smd ? b EAST16083GA3 4 copyright ? 2010, everlight americas inc. all rights reserved. release date : 16-feb-2017 issue no: dse-0017474 rev.1 www.everlightamericas.com typical electro-optical characteristics curves relative luminous intensity ambient temperature ta (c) -60 forward current derating curve ambient temperature ta (c) 0 forward current 10 0 20 30 25 f i (ma) 40 50 1 10 40 20 60 100 85 -20 -40 0 20 60 40 100 80 100 % ) ( 1000 luminous intensity vs. ambient temperature 10 relative luminous intensity 1 10 100 % ) ( 1000 forward current 10 10 i (ma) f ta=25c luminous intensity vs d u t y = 1 / 1 0 f = 1 k h z forward current ta=25 % 400 relative luminous intensity 0 25 75 50 ( 100 550 450 500 600 ) spectrum distribution 2.6 forward current 0 10 25 20 i (ma) f 40 30 50 forward voltage 4.2 3.4 3.0 3.8 4.5 ta=25c forward current vs. radiation diagram 0 0.5 0.3 0.1 0.7 0.8 0.9 1.0 40 80 0.6 0.2 0.4 90 70 60 50 10 20 30 ta=25c wavelength (nm) forward voltage v (v) f
datasheet smd ? b EAST16083GA3 5 copyright ? 2010, everlight americas inc. all rights reserved. release date : 16-feb-2017 issue no: dse-0017474 rev.1 www.everlightamericas.com package dimension recommended solder pad suggested pad dimension is just for reference only. please modify the pad dimension based on individual need. note: tolerances unless mentioned 0.1mm. unit = mm
datasheet smd ? b EAST16083GA3 6 copyright ? 2010, everlight americas inc. all rights reserved. release date : 16-feb-2017 issue no: dse-0017474 rev.1 www.everlightamericas.com moisture resistant packing materials label explanation ? cpn: customers product number ? p/n: product number ? qty: packing quantity ? cat: luminous intensity rank ? hue: chromaticity coordinate s & dom. wavelength rank ? ref: forward voltage rank ? lot no: lot number reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
datasheet smd ? b EAST16083GA3 7 copyright ? 2010, everlight americas inc. all rights reserved. release date : 16-feb-2017 issue no: dse-0017474 rev.1 www.everlightamericas.com carrier tape dimensions: loade d quantity 3000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
datasheet smd ? b EAST16083GA3 8 copyright ? 2010, everlight americas inc. all rights reserved. release date : 16-feb-2017 issue no: dse-0017474 rev.1 www.everlightamericas.com precautions for use 1. over-current-proof customer must apply resistors fo r protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proo f bag before the products are read y to use. 2.2 before opening the package: the leds should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: t he led's floor life is 1 year u nder 30 or less and 60% rh or less. if unused leds remain, it should be stored in moisture proof pa ckages. 2.4 if the moisture absorbent mat erial (silica gel) has faded a way or the leds have exceeded the storage time, baking treatment s hould be performed using the fo llowing conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile pre-heating 150~200c 60~120sec. above 217c 60~150sec. 260c max. 10sec. max. 6c/sec.max. above255c 30sec.max. 3c/sec.max. 3.2 reflow soldering should no t be done more than two times. 3.3 when soldering, do not put s tress on the leds during heatin g. 3.4 after soldering, do no t warp the circuit board. 4.soldering iron each terminal is to go to the ti p of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more interva ls, and do soldering of each terminal. be careful because the damage of the product is oft en started at the time of the h and solder. 5.repairing repair should not be done after the leds have been soldered. wh en repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed b eforehand whether the characteristics of the leds will or will not be damaged by repairing.
datasheet smd ? b EAST16083GA3 9 copyright ? 2010, everlight americas inc. all rights reserved. release date : 16-feb-2017 issue no: dse-0017474 rev.1 www.everlightamericas.com application restrictions high reliability applications suc h as military/aerospace, autom otive safety/security systems, and medical equipment may require different product. if you hav e any concerns, please contact everlight americas before using this product in your applicatio n. this specification guarantees the quality and performance of the product a s an individual component. do n ot use this product beyond the specification described in this document. disclaimer 1. everlight reserves the right (s) on the adjustment of product material mix for the specification. 2. the product meets everlight p ublished specification for a pe riod of twelve (12) months from date of shipment. 3. the graphs shown in this datas heet are representing typical data only and do not show guaranteed values. 4. when using this product, pleas e observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. ever light assumes no responsibility for any damage resulting from the use of the product which does not comply wi th the absolute maximum ratings and the instructions included in these specification sheets. 5. these specification sheets inc lude materials protected under copyright of everlight. rep roduction in any form is prohibited without obtaining everlights prior consent. 6. this product is not intended to be used for military, aircra ft, automotive, medical, life sustaining or life saving applications or any other applicat ion which can result in human injury or death. please contact authorized everlight sales agent for spec ial application request.
|
